Design and print your own custom fabric at
Fat Quarter Tuesday Project

DIY Hair Scrunchies!

Hair scrunchies are making a comeback! Make these fun scrunchies with your fabric scraps or make your own funky print to express your style! Follow along with our easy tutorial below. ❤💁


  • Fabric
  • Elastic (”1/8- 1/2” width)
  • Sewing Machine
  • Hand Needle
  • Thread
  • Scissors
  • Pins
  • Safety pin
  • Marking Chalk

Step 1: Preparing the fabric

To start you will cut out your fabric. You will need a 4” by 21” strip.

Next you will fold the fabric in half right sides together long ways and pin the edge closed.

Step 2: Sewing the fabric

Then you will sew the long edge at ½” seam allowance starting 2” from the top end and ending 2” away from the bottom end.

Next using a safety pin turn the strip right side out. Then lining up the short ends right side together sew at ½” seam allowance.

Step 3: Adding elastic

Then using about 8” of elastic feed it through the tube using the safety pin. Sew the ends of the elastic together backstitching several times for maximum strength.

Once that is completed you will hand stitch the opening closed with a ladder stitch! Bam you are all done and can rock your scrunchies all day long!

We had this bright, fun Colored Splatter print by ziggeman printed on our polyester french terry! You can get this or any design you want printed on any of our high quality fabrics! Don’t forget we are having 25% off from now until the end of August so get your fabric now with code alkdf at checkout!

COLORED Splatter by : ziggeman



Polyester French Terry

Colored Splatter


Leave a Reply

Your email address will not be published. Required fields are marked *